This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782117011 | 6 | 796 C | 342 V | 51 M | 0 |
| 1782110559 | 7 | 782 C | 349 V | 50 M | 0 |
| 1782106990 | 6 | 781 C | 351 V | 50 M | 0 |
| 1782106475 | 6 | 780 C | 351 V | 52 M | 0 |
| 1782105625 | 6 | 781 C | 352 V | 53 M | 0 |
| 1782104604 | 6 | 782 C | 353 V | 51 M | 0 |
| 1782103738 | 7 | 783 C | 354 V | 51 M | 0 |
| 1782103397 | 8 | 784 C | 353 V | 50 M | 0 |
| 1782102894 | 8 | 786 C | 355 V | 52 M | 0 |
| 1782102724 | 22 | 786 C | 353 V | 51 M | 0 |
| 1782102397 | 9 | 786 C | 355 V | 50 M | 0 |
| 1782102225 | 8 | 787 C | 354 V | 51 M | 0 |
| 1782102055 | 9 | 788 C | 355 V | 51 M | 0 |
| 1782101898 | 6 | 788 C | 355 V | 51 M | 0 |
| 1782101557 | 7 | 788 C | 356 V | 53 M | 0 |
| 1782101386 | 8 | 789 C | 356 V | 52 M | 0 |
| 1782101218 | 8 | 790 C | 356 V | 53 M | 0 |
| 1782100877 | 7 | 791 C | 357 V | 52 M | 0 |
| 1782100538 | 6 | 791 C | 356 V | 48 M | 0 |
| 1782100199 | 8 | 793 C | 358 V | 51 M | 0 |
| 1782099670 | 7 | 795 C | 358 V | 51 M | 0 |
| 1782099500 | 6 | 795 C | 357 V | 51 M | 0 |
| 1782099161 | 6 | 797 C | 359 V | 50 M | 0 |
| 1782098991 | 7 | 798 C | 359 V | 49 M | 0 |
| 1782098820 | 7 | 798 C | 360 V | 49 M | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)