This is the latest recevied telemetry packets stored in our database for station/object N3RPH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782024109 | 13.28 volts | 0 | 0 | 0 | 0 |
| 1782023510 | 13.29 volts | 0 | 0 | 0 | 0 |
| 1782022909 | 13.34 volts | 0 | 0 | 0 | 0 |
| 1782022310 | 13.52 volts | 0 | 0 | 0 | 0 |
| 1782021110 | 14.4 volts | 0 | 0 | 0 | 0 |
| 1782020509 | 14.29 volts | 0 | 0 | 0 | 0 |
| 1782019910 | 13.7 volts | 0 | 0 | 0 | 0 |
| 1782019310 | 13.6 volts | 0 | 0 | 0 | 0 |
| 1782018710 | 13.58 volts | 0 | 0 | 0 | 0 |
| 1782018110 | 13.55 volts | 0 | 0 | 0 | 0 |
| 1782017509 | 13.54 volts | 0 | 0 | 0 | 0 |
| 1782016909 | 13.54 volts | 0 | 0 | 0 | 0 |
| 1782016310 | 13.53 volts | 0 | 0 | 0 | 0 |
| 1782015710 | 13.53 volts | 0 | 0 | 0 | 0 |
| 1782015109 | 13.53 volts | 0 | 0 | 0 | 0 |
| 1782014509 | 13.52 volts | 0 | 0 | 0 | 0 |
| 1782013910 | 13.51 volts | 0 | 0 | 0 | 0 |
| 1782013309 | 13.51 volts | 0 | 0 | 0 | 0 |
| 1782012709 | 13.5 volts | 0 | 0 | 0 | 0 |
| 1782011509 | 13.48 volts | 0 | 0 | 0 | 0 |
| 1782010909 | 13.44 volts | 0 | 0 | 0 | 0 |
| 1782009710 | 13.39 volts | 0 | 0 | 0 | 0 |
| 1782005445 | 13.36 volts | 0 | 0 | 0 | 0 |
| 1782004846 | 13.36 volts | 0 | 0 | 0 | 0 |
| 1782003646 | 13.34 volts | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)