This is the latest recevied telemetry packets stored in our database for station/object KC2G. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BatTemp* | Bat* | ChgA* | Solar* | Chg* |
|---|---|---|---|---|---|
| 1778076935 | 67.5 deg.F | 13.45 V | 1.1 A | 18.4 V | 2.99 Ah |
| 1778075137 | 67.5 deg.F | 13.4 V | 1 A | 19.85 V | 2.26 Ah |
| 1778075135 | 67.5 deg.F | 13.4 V | 1 A | 20.3 V | 2.26 Ah |
| 1778068836 | 65.5 deg.F | 13.35 V | 0.5 A | 18.85 V | 0.75 Ah |
| 1778067937 | 65.5 deg.F | 13.35 V | 0.7 A | 19.9 V | 0.75 Ah |
| 1778067935 | 65.5 deg.F | 13.35 V | 0.7 A | 19.2 V | 0.75 Ah |
| 1778067036 | 65.5 deg.F | 13.35 V | 0.4 A | 17.9 V | 0 Ah |
| 1778067035 | 65.5 deg.F | 13.35 V | 0.4 A | 18.1 V | 0 Ah |
| 1778067030 | 65.5 deg.F | 13.35 V | 0.5 A | 18.35 V | 0 Ah |
| 1778065235 | 65.5 deg.F | 13.3 V | 0.5 A | 18.9 V | 0 Ah |
| 1778064337 | 65.5 deg.F | 13.3 V | 0.2 A | 16.3 V | 0 Ah |
| 1778062536 | 65.5 deg.F | 13.3 V | 0 A | 15.5 V | 0 Ah |
| 1778061636 | 65.5 deg.F | 13.25 V | 0 A | 14.5 V | 0 Ah |
| 1778060738 | 65.5 deg.F | 13.25 V | 0 A | 13.2 V | 0 Ah |
| 1778059835 | 65.5 deg.F | 13.25 V | 0 A | 10 V | 0 Ah |
| 1778058035 | 65.5 deg.F | 13.25 V | 0 A | 10 V | 0 Ah |
| 1778057135 | 65.5 deg.F | 13.25 V | 0 A | 10 V | 0 Ah |
| 1778056236 | 65.5 deg.F | 13.25 V | 0 A | 10 V | 0 Ah |
| 1778056235 | 65.5 deg.F | 13.25 V | 0 A | 10 V | 0 Ah |
*Used Equation Coefficients:
BatTemp: 0, 0.5, 0
Bat: 0, 0.05, 10
ChgA: 0, 0.05, 0
Solar: 0, 0.05, 10
Chg: 0.002, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)