This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | Value5* |
|---|---|---|---|---|---|
| 1778080901 | 33.22 °C | 43.6 %RH | 989.6 hPa | 4.16 V | 0 |
| 1778077263 | 33.03 °C | 42.6 %RH | 989.2 hPa | 4.12 V | 0 |
| 1778072463 | 33.89 °C | 40.1 %RH | 988.5 hPa | 4.16 V | 0 |
| 1778071863 | 33.98 °C | 39.8 %RH | 988.5 hPa | 4.16 V | 0 |
| 1778071263 | 34.04 °C | 39.5 %RH | 988.5 hPa | 4.16 V | 0 |
| 1778070663 | 34.16 °C | 39.3 %RH | 988.4 hPa | 4.16 V | 0 |
| 1778069463 | 34.44 °C | 39 %RH | 988.1 hPa | 4.16 V | 0 |
| 1778068863 | 34.57 °C | 38.7 %RH | 987.9 hPa | 4.16 V | 0 |
| 1778068263 | 34.8 °C | 38.5 %RH | 987.7 hPa | 4.16 V | 0 |
| 1778067663 | 35.03 °C | 38.3 %RH | 987.6 hPa | 4.16 V | 0 |
| 1778067063 | 35.1 °C | 38.2 %RH | 987.4 hPa | 4.16 V | 0 |
| 1778066463 | 35.43 °C | 37.5 %RH | 987.2 hPa | 4.1 V | 0 |
| 1778065863 | 36.13 °C | 37 %RH | 986.9 hPa | 4.12 V | 0 |
| 1778057463 | 34.91 °C | 37.1 %RH | 986.9 hPa | 4.16 V | 0 |
| 1778053862 | 36.16 °C | 35.3 %RH | 987.7 hPa | 4.16 V | 0 |
| 1778047862 | 43.36 °C | 31.1 %RH | 989.1 hPa | 4.16 V | 0 |
| 1778047262 | 42.1 °C | 32 %RH | 989.2 hPa | 4.16 V | 0 |
| 1778046662 | 41.77 °C | 32.3 %RH | 989.4 hPa | 4.11 V | 0 |
| 1778045462 | 40.35 °C | 33.7 %RH | 989.7 hPa | 4.17 V | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)