This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782475754 | 1367 | 69.5 | 39.2 | 56.2 | 0 |
| 1782475191 | 1369 | 69.7 | 38.6 | 56 | 0 |
| 1782474554 | 1367 | 70.2 | 39.2 | 56.5 | 0 |
| 1782472790 | 1371 | 70.1 | 39.2 | 56.5 | 0 |
| 1782469754 | 1369 | 69.5 | 38.6 | 56.1 | 0 |
| 1782469190 | 1367 | 69 | 38.6 | 55.1 | 0 |
| 1782467991 | 1369 | 70 | 38.6 | 57 | 0 |
| 1782467354 | 1369 | 70 | 39.2 | 56.4 | 0 |
| 1782466154 | 1371 | 69.6 | 39.2 | 56.1 | 0 |
| 1782463189 | 1367 | 71.4 | 39.7 | 57.6 | 0 |
| 1782462554 | 1367 | 72.3 | 39.7 | 57.9 | 0 |
| 1782459588 | 1364 | 75.8 | 41.9 | 62.9 | 0 |
| 1782458390 | 1369 | 76.1 | 42.4 | 61.7 | 0 |
| 1782457754 | 1369 | 76.9 | 42.9 | 63.4 | 0 |
| 1782457189 | 1367 | 77.7 | 43.5 | 65.5 | 0 |
| 1782455354 | 1369 | 77.6 | 42.9 | 64.7 | 0 |
| 1782454792 | 1367 | 77.8 | 42.9 | 65.4 | 0 |
| 1782454154 | 1369 | 77.9 | 43.5 | 65.1 | 0 |
| 1782451753 | 1369 | 78.6 | 44 | 65.6 | 0 |
| 1782451190 | 1366 | 79 | 44 | 65.6 | 0 |
| 1782449990 | 1367 | 80.4 | 44.5 | 67.4 | 0 |
| 1782449354 | 1369 | 81.2 | 45.6 | 67.4 | 0 |
| 1782448154 | 1364 | 81.8 | 45.6 | 68.6 | 0 |
| 1782447590 | 1369 | 82 | 46.2 | 67.7 | 0 |
| 1782446953 | 1372 | 83 | 46.2 | 67.8 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)