This is the latest recevied telemetry packets stored in our database for station/object HS8AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782034057 | 31.18 °C | 93.2 %RH | 4.2 V | 0 | 0 |
| 1782033457 | 31.46 °C | 92.3 %RH | 4.21 V | 0 | 0 |
| 1782032857 | 32.02 °C | 91.3 %RH | 4.21 V | 0 | 0 |
| 1782025656 | 35.26 °C | 78.3 %RH | 4.21 V | 0 | 0 |
| 1782025056 | 36.11 °C | 78 %RH | 4.21 V | 0 | 0 |
| 1782023856 | 35.85 °C | 79.5 %RH | 4.21 V | 0 | 0 |
| 1782023256 | 36.46 °C | 79.4 %RH | 4.21 V | 0 | 0 |
| 1782022656 | 34.81 °C | 82.4 %RH | 4.2 V | 0 | 0 |
| 1782020256 | 38.11 °C | 72.1 %RH | 4.21 V | 0 | 0 |
| 1782019656 | 35.13 °C | 79.7 %RH | 4.21 V | 0 | 0 |
| 1782019056 | 35.62 °C | 77.7 %RH | 4.21 V | 0 | 0 |
| 1782018456 | 36.81 °C | 73.3 %RH | 4.2 V | 0 | 0 |
| 1782017856 | 38 °C | 72.9 %RH | 4.21 V | 0 | 0 |
| 1782017256 | 37.06 °C | 76.4 %RH | 4.2 V | 0 | 0 |
| 1782016656 | 36.56 °C | 77.9 %RH | 4.21 V | 0 | 0 |
| 1782016056 | 36.03 °C | 77.6 %RH | 4.21 V | 0 | 0 |
| 1782015456 | 36.04 °C | 79.1 %RH | 4.21 V | 0 | 0 |
| 1782014856 | 35.8 °C | 77.7 %RH | 4.21 V | 0 | 0 |
| 1782014256 | 35.42 °C | 79.3 %RH | 4.21 V | 0 | 0 |
| 1782013645 | 35.19 °C | 80.2 %RH | 4.21 V | 0 | 0 |
| 1782013045 | 36.29 °C | 76.6 %RH | 4.21 V | 0 | 0 |
| 1782012445 | 36.45 °C | 78.4 %RH | 4.21 V | 0 | 0 |
| 1782011245 | 34.38 °C | 83.7 %RH | 4.21 V | 0 | 0 |
| 1782010645 | 34.32 °C | 83.7 %RH | 4.21 V | 0 | 0 |
| 1782010045 | 33.93 °C | 85.3 %RH | 4.21 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)