This is the latest recevied telemetry packets stored in our database for station/object HS2AC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | Value5* |
|---|---|---|---|---|---|
| 1781940406 | 28.93 °C | 81.6 %RH | 800 hPa | 3.16 V | 0 |
| 1781939806 | 29.93 °C | 77.5 %RH | 800 hPa | 3.23 V | 0 |
| 1781939206 | 30.66 °C | 76.5 %RH | 800 hPa | 3.27 V | 0 |
| 1781938006 | 31.91 °C | 69.9 %RH | 800 hPa | 3.32 V | 0 |
| 1781936205 | 32.52 °C | 65.7 %RH | 800 hPa | 3.34 V | 0 |
| 1781935605 | 31.43 °C | 68.9 %RH | 800 hPa | 3.31 V | 0 |
| 1781935005 | 32.02 °C | 68.7 %RH | 800 hPa | 3.28 V | 0 |
| 1781932605 | 31.49 °C | 71.2 %RH | 800 hPa | 3.13 V | 0 |
| 1781932005 | 31.8 °C | 73.5 %RH | 800 hPa | 3.12 V | 0 |
| 1781931405 | 31.09 °C | 78.2 %RH | 800 hPa | 2.93 V | 0 |
| 1781930805 | 30.85 °C | 79.6 %RH | 800 hPa | 3.01 V | 0 |
| 1781930205 | 30.44 °C | 82 %RH | 800 hPa | 2.97 V | 0 |
| 1781929605 | 30.36 °C | 80.4 %RH | 800 hPa | 3.04 V | 0 |
| 1781927361 | 0 °C | 0 %RH | 800 hPa | 0 V | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)