This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781263136 | 0 | 3 | 0 | 4.19 | 6.04 |
| 1781262536 | 275 | 1000 | 0 | 4.19 | 6.06 |
| 1781261036 | 270 | 985 | 0 | 4.2 | 6.04 |
| 1781259836 | 266 | 968 | 0 | 4.22 | 6.04 |
| 1781259237 | 264 | 962 | 0 | 4.22 | 6.06 |
| 1781258937 | 263 | 957 | 0 | 4.22 | 6.06 |
| 1781256836 | 256 | 942 | 0 | 4.24 | 6.06 |
| 1781255336 | 251 | 928 | 0 | 4.25 | 4.52 |
| 1781254737 | 249 | 922 | 0 | 4.25 | 4.56 |
| 1781254137 | 247 | 918 | 0 | 4.26 | 6 |
| 1781253837 | 246 | 914 | 0 | 4.26 | 5.98 |
| 1781251737 | 239 | 895 | 0 | 4.23 | 5.4 |
| 1781251437 | 238 | 891 | 0 | 4.22 | 5.34 |
| 1781251137 | 237 | 887 | 0 | 4.22 | 5.3 |
| 1781250836 | 236 | 886 | 0 | 4.2 | 5.14 |
| 1781250237 | 234 | 877 | 0 | 4.18 | 5.06 |
| 1781248737 | 229 | 863 | 0 | 4.11 | 4.32 |
| 1781248437 | 228 | 859 | 0 | 4.14 | 4.64 |
| 1781248137 | 227 | 859 | 0 | 4.1 | 4.32 |
| 1781247237 | 224 | 848 | 0 | 4.17 | 5.1 |
| 1781246637 | 222 | 841 | 0 | 4.13 | 4.52 |
| 1781246036 | 220 | 838 | 0 | 4.1 | 4.22 |
| 1781245737 | 219 | 831 | 0 | 4.09 | 4.22 |
| 1781245137 | 217 | 826 | 0 | 4.1 | 4.26 |
| 1781244837 | 216 | 823 | 0 | 4.09 | 4.22 |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)