This is the latest recevied telemetry packets stored in our database for station/object HS8AS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT * | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781228250 | 25.44 °C | 99.9 %RH | 3.93 V | 0 | 0 |
| 1781227638 | 25.12 °C | 99.9 %RH | 3.93 V | 0 | 0 |
| 1781227038 | 24.95 °C | 99.9 %RH | 3.91 V | 0 | 0 |
| 1781226438 | 24.93 °C | 99.9 %RH | 3.91 V | 0 | 0 |
| 1781225838 | 24.72 °C | 99.9 %RH | 3.9 V | 0 | 0 |
| 1781225238 | 24.56 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781224638 | 24.46 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781224038 | 24.49 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781223438 | 24.4 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781222838 | 24.4 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781221638 | 24.65 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781221038 | 24.54 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781219838 | 24.34 °C | 99.9 %RH | 3.88 V | 0 | 0 |
| 1781219238 | 24.33 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781218038 | 24.41 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781217438 | 24.39 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781216838 | 24.41 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781216238 | 24.45 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781215638 | 24.53 °C | 99.9 %RH | 3.89 V | 0 | 0 |
| 1781214438 | 24.66 °C | 99.9 %RH | 3.9 V | 0 | 0 |
| 1781213838 | 24.8 °C | 99.9 %RH | 3.9 V | 0 | 0 |
| 1781210846 | 25.1 °C | 98.7 %RH | 3.91 V | 0 | 0 |
| 1781203038 | 24.2 °C | 99.9 %RH | 3.95 V | 0 | 0 |
| 1781200637 | 24.03 °C | 99.9 %RH | 3.97 V | 0 | 0 |
| 1781198237 | 24.68 °C | 99.9 %RH | 3.98 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT : 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)