This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-16. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781077349 | 4.03 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781075546 | 4.05 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781073743 | 4.05 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781072842 | 4.05 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781071940 | 4.07 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781069235 | 4.03 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781068333 | 4.1 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781064727 | 4.05 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781062924 | 3.98 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781061121 | 4.17 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781060219 | 4.13 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781058416 | 4.09 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781056613 | 4.08 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781054810 | 4.15 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781053908 | 4.04 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781053007 | 4.18 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781052105 | 4.17 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781050302 | 4.15 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781048499 | 4.1 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781043991 | 4.17 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781042188 | 4.12 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781037680 | 4.15 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781035877 | 4.03 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781031369 | 4.07 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1781029566 | 4.19 VDC | 1.1 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)