This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782020581 | 1344 | 64.1 | 33.8 | 53.3 | 0 |
| 1782020282 | 1344 | 64.1 | 33.2 | 53.3 | 0 |
| 1782019083 | 1342 | 64.7 | 34.3 | 53.6 | 0 |
| 1782018782 | 1343 | 64.8 | 34.3 | 53.7 | 0 |
| 1782016982 | 1345 | 66.1 | 34.3 | 54.7 | 0 |
| 1782015182 | 1342 | 68.1 | 35.4 | 55.8 | 0 |
| 1782013382 | 1340 | 71.3 | 37 | 58.2 | 0 |
| 1782013083 | 1341 | 71.9 | 37.6 | 58.7 | 0 |
| 1782011883 | 1341 | 74.9 | 39.7 | 60.9 | 0 |
| 1782011582 | 1345 | 75.8 | 39.7 | 61.8 | 0 |
| 1782009782 | 1348 | 80.5 | 42.4 | 67.4 | 0 |
| 1782008283 | 1350 | 82 | 43.5 | 70.4 | 0 |
| 1782007982 | 1234 | 82.3 | 44 | 70.1 | 0 |
| 1782007082 | 1293 | 83.9 | 44.5 | 71.5 | 0 |
| 1782005882 | 1291 | 85.4 | 45.1 | 73.6 | 0 |
| 1782004381 | 1290 | 87.1 | 46.2 | 75.6 | 0 |
| 1782003482 | 1289 | 87.7 | 46.2 | 76.6 | 0 |
| 1782002283 | 1290 | 88.4 | 47.2 | 77.3 | 0 |
| 1781985481 | 1326 | 87.8 | 46.2 | 77.6 | 0 |
| 1781984282 | 1325 | 86.4 | 46.2 | 75.9 | 0 |
| 1781980981 | 1327 | 83.3 | 44 | 73 | 0 |
| 1781980682 | 1326 | 82.8 | 44 | 73 | 0 |
| 1781979482 | 1327 | 81.4 | 42.9 | 71.6 | 0 |
| 1781978281 | 1328 | 79.8 | 41.9 | 70 | 0 |
| 1781977082 | 1325 | 78.5 | 41.3 | 68.3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)