This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778087765 | 4.37 V | 36 Pkts | 0.65 % | 0 | 0 |
| 1778087437 | 4.37 V | 39 Pkts | 0.49 % | 0 | 0 |
| 1778087373 | 4.37 V | 37 Pkts | 0.57 % | 0 | 0 |
| 1778086796 | 4.37 V | 36 Pkts | 0.6 % | 0 | 0 |
| 1778086732 | 4.37 V | 37 Pkts | 0.61 % | 0 | 0 |
| 1778086668 | 4.37 V | 38 Pkts | 0.68 % | 0 | 0 |
| 1778086536 | 4.37 V | 36 Pkts | 0.57 % | 0 | 0 |
| 1778085496 | 4.37 V | 38 Pkts | 0.65 % | 0 | 0 |
| 1778085432 | 4.37 V | 37 Pkts | 0.56 % | 0 | 0 |
| 1778085108 | 4.37 V | 37 Pkts | 0.5 % | 0 | 0 |
| 1778084656 | 4.36 V | 33 Pkts | 0.63 % | 0 | 0 |
| 1778084592 | 4.37 V | 36 Pkts | 0.62 % | 0 | 0 |
| 1778084528 | 4.37 V | 37 Pkts | 0.59 % | 0 | 0 |
| 1778084204 | 4.37 V | 37 Pkts | 0.6 % | 0 | 0 |
| 1778083811 | 4.37 V | 37 Pkts | 0.63 % | 0 | 0 |
| 1778083619 | 4.37 V | 41 Pkts | 0.52 % | 0 | 0 |
| 1778083555 | 4.39 V | 40 Pkts | 0.51 % | 0 | 0 |
| 1778083294 | 4.37 V | 41 Pkts | 0.49 % | 0 | 0 |
| 1778082906 | 4.35 V | 36 Pkts | 0.55 % | 0 | 0 |
| 1778082776 | 4.37 V | 39 Pkts | 0.54 % | 0 | 0 |
| 1778082711 | 4.37 V | 38 Pkts | 0.56 % | 0 | 0 |
| 1778082322 | 4.37 V | 38 Pkts | 0.5 % | 0 | 0 |
| 1778082258 | 4.37 V | 37 Pkts | 0.53 % | 0 | 0 |
| 1778081543 | 4.37 V | 39 Pkts | 0.55 % | 0 | 0 |
| 1778081476 | 4.37 V | 38 Pkts | 0.56 % | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 0.01, 0
Value3: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)